SPECIFICATIONS

Brand Name: Fynmi

Choice: yes

High-concerned chemical: none

Main Material: ABS

Material: Plastic

Origin: Mainland China

Products Name: 4 keys keycaps Puller

Size: 11*8.5*2mm

Type: Key Puller

Used for: Keycaps Pulling

semi_Choice: yes

This keycap puller lifts caps off your mechanical keyboard cleanly, whether it is cleaning day or you are fitting a new set. It is a light ABS tool that hooks under the cap edges, so you are not prying with a butter knife.

Why it earns a drawer spot

• Even pull: it grips the cap from opposite sides, so caps come off straight instead of tilting on the stem.
• Light and simple: ABS plastic with no moving parts, so there is nothing to wear out or charge.
• Cleaning made easier: pull a row of caps, clear out the dust and crumbs, then press them back on.
• Keycap swaps: handy for changing to a new keycap set or moving a few accent caps around.
• Two colors: white or black.

Specs

Good to know

• It pulls keycaps only. Removing switches from a hot-swap board needs a separate switch puller.
• Pull straight up and slowly, especially on stabilized keys like the space bar and shift.
• Low-profile keyboards and laptop keys usually need different tools, so check your keycap height first.

FAQ

How do you use a keycap puller?

Slide the prongs under two opposite edges of the cap, squeeze lightly and pull straight up. The cap comes off the stem without bending it.

Does it work on any mechanical keyboard?

It suits standard-height keycaps on most mechanical keyboards. Very low-profile caps may not leave enough room for the prongs.

Can it remove switches too?

No. It is for keycaps. Hot-swap switches need a dedicated switch puller.

What does 4 keys mean?

That is the name the maker gives this puller. We are checking with the supplier whether it lifts four caps at once and will update this page.